DTC Troubleshooting: B1233 (B-A1), B1233 (40)
DTC B1233 or DTC screen B-A1 or DTC indicator 40: An open in the air mix control motor circuit (driver's)
DTC Description |
DTC |
B1233 An open in the air mix control motor circuit (driver's) |
| |
|
1. |
Problem verification:
Problem verification
?1. |
Clear the DTCs with the HDS.
|
?2. |
Turn the vehicle to the OFF (LOCK) mode and then the ON mode. |
?4. |
Check for DTCs.
DTC Description |
DTC |
B1233 An open in the air mix control motor circuit (driver's) |
| |
| | |
Is DTC B1233 or Error on the DTC screen B-A1 (climate control panel without display) or 40 (climate control panel with display) indicated?
|
|
|
|
|
|
|
Intermittent failure. Check for loose wires or poor connections on the air mix control motor circuit.? |
|
|
|
Intermittent failure. Check for loose wires or poor connections on the driver's air mix control motor circuit.? |
2. |
Determine possible failure area (AMD-P-DR line, others):
Determine possible failure area (AMD-P-DR line, others)
?1. |
Turn the vehicle to the OFF (LOCK) mode. |
?2. |
Disconnect the following connector.
Without dual zone control: Air mix control motor 5P connector |
With dual zone control: Driver's air mix control motor 5P connector | |
| |
?3. |
Turn the vehicle to the ON mode. |
?4. |
Measure the voltage between test points 1 and 2.
Without dual zone control
Test condition |
Vehicle ON mode |
Air mix control motor 5P connector: disconnected |
Test point 1 |
Air mix control motor 5P connector (female terminals) No. 2:  |
Test point 2 |
Body ground | |
|
With dual zone control
Test condition |
Vehicle ON mode |
Driver's air mix control motor 5P connector: disconnected |
Test point 1 |
Driver's air mix control motor 5P connector (female terminals) No. 2:  |
Test point 2 |
Body ground | |
|
| |
Is there about 5 V?
|
|
|
The AMD-P-DR wire is OK. Go to step 3. |
|
|
|
|
3. |
Open wire check (SENS-COM line):
Open wire check (SENS-COM line)
?1. |
Measure the voltage between test points 1 and 2.
Without dual zone control
Test condition |
Vehicle ON mode |
Air mix control motor 5P connector: disconnected |
Test point 1 |
Air mix control motor 5P connector (female terminals) No. 2:  |
Test point 2 |
Air mix control motor 5P connector (female terminals) No. 1:  | |
|
With dual zone control
Test condition |
Vehicle ON mode |
Driver's air mix control motor 5P connector: disconnected |
Test point 1 |
Driver's air mix control motor 5P connector (female terminals) No. 2:  |
Test point 2 |
Driver's air mix control motor 5P connector (female terminals) No. 3:  | |
|
| |
Is there about 5 V?
|
|
|
|
|
|
|
Repair an open in the SENS-COM wire.? |
4. |
Open wire check (AMD-P-DR line):
Open wire check (AMD-P-DR line)
?1. |
Measure the voltage between test points 1 and 2.
Without dual zone control
Test condition |
Vehicle ON mode |
Air mix control motor 5P connector: disconnected |
Test point 1 |
|
Test point 2 |
Body ground | |
|
With dual zone control
Test condition |
Vehicle ON mode |
Driver's air mix control motor 5P connector: disconnected |
Test point 1 |
|
Test point 2 |
Body ground | |
| | |
Is there about 5 V?
|
|
|
Repair an open in the AMD-P-DR wire.? |
|
|
|
| |